Protect & Shine ™ TM


A high quality self shine polymer polish for regular maintenance, used to provide a protective high-shine surface finish. For interior use only.


Provides the best results when applied to already sealed natural stone, marble, travertine, limestone, slate, terracotta, unglazed ceramics, cement and vinyl tiles.

STONESHIELD PROTECT & SHINE™ can be applied over most STONESHIELD sealers. Can be used as a pre-sealer prior to grouting on polished porcelain and textured ceramic tiles.


Must be applied undiluted, onto a dry surface. Approx. coverage over an existing sealer should be between 15m² - 20m² per litre depending on method of application. Minimum 2 coats required.

Expected Wear

Will vary depending on the number of coats, traffic, area, maintenance method and use of aggressive cleaners. Expected wear up to 1 year.

Method Of Application

Always test on a small area first to ensure suitability and desired result. Unsealed surfaces should be sealed and left to cure for at least 24 hours prior to using STONESHIELD PROTECT & SHINE™. Can safely be applied onto most sealers such as STONESHIELD QUARRI-SEAL™, SANDSTONE-SEALER, QUARRI-SEAL™ MATT, H2O SEAL & SHINE™ and PROTECTA PLUS™. Ensure that the tile surface is clean, dry and sealed. Using a clean lambswool applicator, sponge or mop, apply a thin even coat in one direction. Do not allow pooling or bubbles to form. 3 Thin coats will ensure a better finish than 1 thick coat. Allow 30 minutes undisturbed drying time between coats. STONESHIELD PROTECT & SHINE™ can be buffed after 24 hours using a floor polisher and white floor pad to increase the shine and durability.

Cure Times

Allow foot traffic after 4 hours. Keep floor area dry for 12 hours. Full cure after 24 hours


Only use STONESHIELD DAILY-CLEAN™ to prolong the life of the coating. Re-apply STONESHIELD PROTECT & SHINE™ as often as required as long as surface is clean and dry. STONESHIELD PROTECT & SHINE™ can be stripped using STONESHIELD WAX-OFF™.


Do not use externally or in areas of standing water or in areas where water could create slippery conditions. Store and use product between 16c and 32c.


Avoid skin and eye contact. Keep out of reach of children and pets and store away from other chemicals. Do not allow contact with other sensitive surfaces. Not recommended as a finishing sealer over glazed ceramics and porcelain tiles.

Under no circumstances shall STONESHIELD accept any liability for damage, direct or consequential, arising from any use or misuse of our products. Always test first. No warranties express or implied, including those of merchantability or fitness for particular purpose extend beyond the description on this label. Determining suitability of product shall be the sole responsibility of the user.