Marble Honing Powder TM

Description

Marble honing powder is a non-acidic honing powder designed to remove light surface scratches and uneven wear patterns to create an even honed surface finish. The honed surface is now ready to be re-polished or sealed

Uses

Suitable on marble, travertine and limestone.

Coverage

Approx. 50 m2 per kilo depending on porosity, surface texture, hardness of stone and method of application.

Method Of Application

Always test on a small area first, to ensure suitability and desired result. Tile surface should be clean, dry and free of sealers, waxes and grout residue. Sprinkle STONESHIELD HONING POWDER liberally over a 5 -10 m2 area and add water to form a honing slurry. Buff using a standard speed (175 RPM) floor polisher with a synthetic fibre floor pad. Do not allow the slurry to dry out. Honing powder or water may be added as required. Squeegee wet slurry to check the desired result has been achieved before removing the slurry with a wet & dry vac.

Rinse well with clean water. Harder marble stone may require multiple applications or longer buffing time.

Limitations

Not intended to be used as a pre-polishing powder. Not effective on granite and most green marbles.

STONESHIELD HONING POWDER is only intended to produce an even honed finish.

Precautions

Ensure good ventilation and avoid breathing dust particles. Avoid skin and eye contact. Wear goggles, gloves and suitable protective clothing when necessary. Keep out of reach of children and pets and store away from other chemicals. Do not allow contact with other sensitive surfaces.

Under no circumstances shall STONESHIELD accept any liability for damage, direct or consequential, arising from any use or misuse of our products. Always test first. No warranties express or implied, including those of merchantability or fitness for particular purpose extend beyond the description on this label. Determining suitability of product shall be the sole responsibility of the user.