Sandstone-Sealer TM


STONESHIELD SANDSTONE SEALER is a superior quality natural look, non-yellowing water-based resin sealer that provides a protective surface sheen, good stain resistance and ease of cleaning. For interior and exterior use.


Suitable on natural, tumbled, and honed sandstone, limestone and similar natural stone.


Approx. 15 m2 per litre per coat depending on porosity, surface texture, temperature and method of application. Minimum of 2 coats required.

Expected Wear

Will vary depending on texture, hardness of surface, area, traffic, maintenance, weather and use of aggressive cleaners. Expected wear – up to 5 years.

Method of Application

Always test on a small area first, to ensure suitability and desired result. Allow tile to dry for 8 hours after washing, prior to sealing. Surface must be clean, dry and free of sealers, waxes and grout residue. Apply thin even coats of sealer, in one direction, using a lambswool applicator, clean mop or sponge only. Do not allow pooling or bubbles to form.

Cure times

Allow 2 hours between coats. Foot traffic after 4 hours. Do not apply externally if rain is expected within 12 hours. Full cure in 48 hours.


After 2 hours apply water droplets to 1 tile, if water is absorbed, apply additional coats. A consistent even sheen is required.


Only use STONESHIELD DAILY-CLEAN to prolong life of sealer. Re-apply STONESHIELD SANDSTONE-SEALER if signs of wear occur. STONESHIELD SURFACE-PROTECTOR may be applied as a protective maintenance polish internally.


Do not apply to damp tiles. Do not apply to hot tiles. Allow 7 days after laying with quality tile adhesive before sealing. Do not wet tiles for at least 24 hours after sealing. Store and use between 16°C and 32° C only.


Ensure good ventilation and avoid breathing vapours. Avoid skin and eye contact. Wear goggles, gloves and suitable protective clothing when necessary. Keep out of reach of children and pets and store away from other chemicals. Do not mix with other chemicals. Do not allow contact with other sensitive surfaces.

More in this category: « Cement Sealer Protecta-Plus ™ »

Under no circumstances shall STONESHIELD accept any liability for damage, direct or consequential, arising from any use or misuse of our products. Always test first. No warranties express or implied, including those of merchantability or fitness for particular purpose extend beyond the description on this label. Determining suitability of product shall be the sole responsibility of the user.