A premium solvent based stripper for the removal of acrylic and urethane sealers, varnishes and paint from natural stone, marble, granite, slate, terrazzo, terracotta, bricks, glazed and unglazed ceramics.
Must be applied undiluted, onto a dry surface. Depending on the type of sealer being removed, coverage should be between 2 and 6m² per litre.
Method of Application
Always test on a small area first to ensure suitability and desired result. Mask off all areas and surfaces not to be stripped. Do not use on hot tiles or in direct sunlight, as the STRIP OFF will dry too quickly. Apply evenly by brush, lambs wool applicator or mop to a workable area of approximately 5m². STRIP OFF should be applied and left for 5 minutes undisturbed to break down the sealer but do not allow the product to dry on the surface. Scrub with a Black Stripping Pad, nylon bristle brush or broom. Whilst scrubbing, add STONESHIELD DEEP CLEAN at a dilution of 1 part to 5 parts water. Inspect the floor to ensure that all traces of sealer ave been removed. If necessary repeat the process until the entire area has been stripped. If satisfied that the floor is clean and completely stripped, rinse the total floor area at least twice more with clean water and allow to dry thoroughly before sealing.
Ensure good ventilation and avoid breathing vapours. Avoid skin and eye contact. Wear goggles, gloves and suitable protective clothing when necessary. Keep out of reach of children and pets and store away from other chemicals. Do not allow contact with other sensitive surfaces.