Cement Sealer TM

Description

STONESHIELD CEMENT SEALER is a premium quality, non-yellowing solvent-based resin sealer that provides a satin-finish, superior stain resistance and surface protection. A penetrating sealer that colour enhances and provides a “wet look” finish. For interior and exterior use.

Uses

Suitable on natural and oxide cement floors, imprint paving, cement tiles, pavers and cobbles. Also suitable for low traffic & domestic concrete floors.

Coverage

Approx. 10 m2 per litre per coat depending on porosity, surface texture, temperature and method of application. Minimum of 2 coats required.

Expected Wear

Will vary depending on texture, the hardness of surface, area, traffic, maintenance, weather and use of aggressive cleaners. Expected wear – up to 5 years.

Method of Application

Always test on a small area first, to ensure suitability and the desired result. Allow surface to dry for 24 hours after washing, prior to sealing. Surface must be clean, 100% dry and free of sealers, waxes, grout residue, grease and oil. Thoroughly stir contents, prior to application. Apply thin even coats of sealer, in one direction, using a Lambswool applicator, or a solvent resistant sponge roller only. Do not allow pooling or bubbles to form.

Cure times

Allow 2 hours between coats. Foot traffic after 8 hours. Do not apply externally if rain is expected within 12 hours. Full cure in 48 hours.

Test

After 2 hours apply water droplets to 1 tile, if water is absorbed, apply additional coats. A consistent, even sheen is required.

Maintenance

Only use STONESHIELD DAILY-CLEAN to prolong the life of the sealer. Re-applies STONESHIELD CEMENT SEALER if signs of wear occur.

Limitations

Do not apply to damp tiles or floors. Do not apply in direct sunlight and onto the hot tiles. Allow 10-14 days after laying with quality tile adhesive before sealing. Do not wet tiles or floors for at least 48 hours after sealing. Not suitable for use on polished stone, glazed ceramic and porcelain tiles. Store and use between 16°C and 32° C only.

Precautions

Ensure good ventilation and avoid breathing vapours. Avoid skin and eye contact. Wear goggles, gloves and suitable protective clothing when necessary. Keep out of reach of children and pets and store away from other chemicals. Do not allow contact with other sensitive surfaces. Flammable.

More in this category: « Quarri-Seal® Sandstone-Sealer »